GE 68K System - Manual (Page 30)

GE Energy Services
68K System Monitor
User's Guide
SWM0023 1.00 2 General
3-4 Full Release
Section 2: Monitor Commands
AL - Change Auto-logout Timer
Platform o CPM o D20
D20 Base o D20 ME
D20 Base þ D20/200
CCU Base þ D20/200 ME
CCU Base þ D25
Description Use this command to change the monitor’s auto-logout timer duration from the
default of 5 minutes.
Syntax Below is usage and syntax information for this command
Command Format al timout (minutes)
Variables None
Parameters minutes = 0 to 32767 minutes. ‘0’ disables the timer.
Example Type al 15 and press ENTER .
Results: The monitor will log out after 15 minutes of
inactivity.
Special
Considerations If the timer is disabled, (set to ‘0’) the monitor can be locked-
out for any other user.