Gateway 8450R User Manual
Page 100
Advertising
Replacing the system board
99
3
Remove all expansion cards from the server. (See “Replacing a hot-swap
PCI card” on page 73 and “Replacing an expansion card” on page 76.)
4
Disconnect all cables from the system board. Note the location and
orientation of each cable as you remove it.
5
Remove the four screws that secure the electronics bay to the chassis, then
pull the electronics bay out through the back panel of the chassis and
place it on a static-free surface.
8506284.book Page 99 Thursday, July 13, 2000 11:43 AM
Advertising