Gateway 8450R - Manual (Page 70)

Replacing the battery 69
8 Replace the EMI foam in the same orientation it was in when you
removed it.
9 Close the case. (See “Closing the case” on page 31.)
10 Reconnect the power cord and all other cords you removed, then turn
on the server.
Replacing the battery
The battery provides power for the server clock and CMOS memory, which
holds the system configuration information.
If your battery is failing you may notice the server clock slowing down and
giving you the incorrect time.
Important Gateway recommends that you run a processor retest from
the BIOS Setup utility whenever you replace or add a
processor.
8506284.book Page 69 Thursday, July 13, 2000 11:43 AM