Replacing the system board – Gateway 8450R User Manual
Page 99
98
Replacing and Adding Internal Devices
5
Install the new front panel board by placing the board in position and
replacing the two screws you removed in Step 4.
6
Plug the hot-plug PCI indicator board cable into the connector on the
new board.
7
Close the case. (See “Closing the case” on page 31.)
8
Reconnect the power cord and the external peripherals, then turn on the
server.
Replacing the system board
The system board integrates the other elements of the server, such as the
processor, memory, storage, networking, and communications.
To replace the system board:
1
Turn off the server and disconnect the power cord and all external
peripheral devices.
2
Open the case. (See “Opening the case” on page 26 and “Preventing static
electricity discharge” on page 25.)
8506284.book Page 98 Thursday, July 13, 2000 11:43 AM