Gateway 8450R - Manual (Page 63)

62 Replacing and Adding Internal Devices
Replacing a processor
When replacing a processor, order a processor upgrade kit from Gateway.
To replace a processor:
1 Turn off the server and disconnect the power cord and all external
peripheral devices.
2 Remove the back top panel. (See “Preventing static electricity discharge”
on page 25 and “Removing the back top panel” on page 28.)
3 Remove the EMI foam cover over the processors.
Caution A heatsink must be installed on each processor. Installing
a processor without a heatsink could result in damage to,
or failure of, the processor.
8506284.book Page 62 Thursday, July 13, 2000 11:43 AM