Fans, Replacing the fans – Gateway 8450R User Manual
Page 90
Advertising
Fans
89
Fans
The server contains six hot-pluggable fans to keep the internal temperature
down to acceptable levels.
Replacing the fans
The fans are located between the electronics bay and the drive bays. The fans
are hot-plug capable so you do not need shut down the server to replace a fan.
To replace a fan:
1
Remove the back top panel. (See “Removing the back top panel” on
page 28 and “Preventing static electricity discharge” on page 25.)
2
Determine which fan has failed by looking at the fan status LEDs in the
fan tray.
8506284.book Page 89 Thursday, July 13, 2000 11:43 AM
Advertising