Gateway 8450R User Manual
Page 76
Advertising
![background image](/manuals/113045/76/background.png)
Expansion cards
75
5
If the card is full-length, release the card retention mechanism at the end
of the card and pull the card from the slot.
6
Insert the replacement card in the slot. Make sure it is fully seated.
7
Push the hot-swap expansion card retention clip back through the back
panel until it clicks into place.
1
3
2
2
1
3
8506284.book Page 75 Thursday, July 13, 2000 11:43 AM
Advertising