Gateway 8450R User Manual
Page 82
Advertising
Expansion cards
81
5
Locate an available slot and remove the slot cover by removing the screw
that secures it in place, then pull out the slot cover.
6
Insert the bottom edge of the expansion card (the keyed edge with the
contacts) into the slot on the system board and push in firmly to seat
the card.
7
Replace the screw you removed earlier.
8
Connect any cables to the card (see card documentation for proper cable
orientation).
8506284.book Page 81 Thursday, July 13, 2000 11:43 AM
Advertising