Gateway 8450R - Manual (Page 32)

Closing the case 31
Closing the case
Close the chassis as soon as you finish installing or removing components
so that dust and dirt do not collect inside the server.
Replacing the front top panel
You can replace the front top panel whether the back top panel is on or off
of the chassis. You must replace the front top panel before you can operate
the server. If you do not, a system intrusion event is logged by the system
management hardware. Be careful not to pinch any cables with the panel as
you replace it.
To replace the front top panel:
1 Place the front top panel on the top of the chassis approximately 3/4-inch
forward from the front of the server.
8506284.book Page 31 Thursday, July 13, 2000 11:43 AM