Gateway 8450R - Manual (Page 61)

60 Replacing and Adding Internal Devices
5 Pull open the socket clamps on each side of the DIMM socket.
6 Insert the new DIMM into the socket, aligning the two notches in the
DIMM with the two notches in the DIMM socket.
7 Gently press the DIMM into the socket until it is firmly seated. Inserting
the DIMM automatically locks the socket clamps on each end of the
DIMM.
8 Once all DIMMs have been installed, replace the memory board in the
server.
8506284.book Page 60 Thursday, July 13, 2000 11:43 AM