Gateway 8450R - Manual (Page 52)

Drives 51
To replace a 5.25-inch device:
1 Turn off the server and disconnect the power cord and all other external
peripheral devices.
2 Remove the bezel. (See “Removing the bezel” on page 27.)
3 Remove the front top panel. (See “Removing the front top panel” on
page 29 and “Preventing static electricity discharge” on page 25.)
4 Disconnect the power and data cables from the device. If you intend to
install a replacement device, note the location and orientation of the
cables to make installing the replacement device easier.
5 Pinch the front ends of the drive rails toward the center of the drive bay,
and pull the drive out of the bay.
8506284.book Page 51 Thursday, July 13, 2000 11:43 AM