Motorola AP-51XX - Manual (Page 144)

AP-51xx Access Point Product Reference Guide 4-52
3. Configure the DHCP Options checkboxes to enable/disable automatic firmware and/or
configuration file updates.
DHCP options are used for out-of-the-box rapid deployment for Motorola wireless products.
The following are the two options available on the access point:
• Enable Automatic Firmware Update
• Enable Automatic Configuration Update
Both DHCP options are enabled by default.
These options can be used to update newer firmware and configuration files on the access
point. For more information on how to configure a DHCP or BootP Server for the automatic
upgrade process, see
Usage Scenarios on page B-1 .
The update is conducted over the LAN or WAN port depending on which server responds
first to the access point’s request for an automatic update.