Motorola AP-51XX User Manual
Page 279
Configuring Access Point Security
6-61
3.
Refer to the
Rogue AP Detail
field for the following information:
4.
Refer to the
Rogue Detector Detail
field for the following information:
BSSID/MAC
Displays the MAC address of the rogue AP. This information could
be useful if the MAC address is determined to be a Motorola MAC
address and the device is interpreted as non-hostile and the device
should be defined as an allowed AP.
ESSID
Displays the ESSID of the rogue AP. This information could be
useful if the ESSID is determined to be non-hostile and the device
should be defined as an allowed AP.
RSSI
Shows the Relative Signal Strength (RSSI) of the rogue AP. Use this
information to assess how close the rogue AP is. The higher the
RSSI, the closer the rogue AP. If multiple access point’s have
detected the same rogue AP, RSSI can be useful in triangulating the
location of the rogue AP.
Finder’s MAC
The MAC address of the access point detecting the rogue AP.