Ap51xx>admin(network.wan)> show – Motorola AP-51XX User Manual
Page 375
8-41
AP51xx>admin(network.wan)> show
Description:
Displays the access point WAN port parameters.
Syntax:
Example:
admin(network.wan)>
show
Status
: enable
Primary DNS Server
: 0.0.0.0
Secondary DNS Server
: 0.0.0.0
Auto-negotiation
: disable
Speed
: 100M
Duplex
: full
WAN IP 2
: disable
WAN IP 3
: disable
WAN IP 4
: disable
WAN IP 5
: disable
WAN IP 6
: disable
WAN IP 7
: disable
WAN IP 8
: disable
PPPoE Mode
: enable
PPPoE User Name
: JohnDoe
PPPoE Password
: *******
PPPoE keepalive mode
: enable
PPPoE Idle Time
: 600
PPPoE Authentication Type
: chap
PPPoE State
admin(network.wan)>
For an overview of the WAN configuration options available using the applet (GUI), see
Configuring WAN Settings on page 5-16
show
Shows the general IP parameters for the WAN port along with settings for the WAN interface..