Motorola AP-51XX - Manual (Page 374)

AP-51xx Access Point Product Reference Guide 8-40
8.3.2 Network WAN Commands
AP51xx>admin(network.wan)>
Description:
Displays the WAN submenu. The items available under this command are shown below.
For an overview of the WAN configuration options using the applet (GUI), see Configuring WAN Settings on page 5-16 .
show Displays the access point WAN configuration and the access point’s current PPPoE configuration.
set Defines the access point’s WAN and PPPoE configuration.
nat Displays the NAT submenu, wherein Network Address Translations (NAT) can be defined.
vpn Goes to the VPN submenu, where the access point VPN tunnel configuration can be set.
content Goes to the outbound content filtering menu.
dyndns Displays the Dynamic DNS submenu, wherein dyndns settings can be defined.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the current configuration to the access point system flash.
quit Quits the CLI and exits the current session.