Motorola AP-51XX - Manual (Page 357)

8-23
AP51xx>admin(network.lan.wlan-mapping)> set
Description:
Sets VLAN parameters for the access point.
Syntax:
Example:
admin(network.lan.wlan-mapping)> set mgmt-tag 1
admin(network.lan.wlan-mapping)> set native-tag 2
admin(network.lan.wlan-mapping)> set mode 1 static
admin(network.lan.wlan-mapping)> show vlan-cfg
Management VLAN Tag :1
Native VLAN Tag :2
WLAN :WLAN1
mapped to VLAN :VLAN 2
VLAN Mode :static
For information on configuring VLANs using the applet (GUI), see Configuring VLAN Support on page 5-5 .
set mgmt- tag <id> Defines the Management VLAN tag (1-4095).
native-tag <id> Sets the Native VLAN tag (1-4095).
mode <wlan-idx> Sets WLAN VLAN mode (WLAN 1-16) to either dynamic or static.