Motorola AP-51XX - Manual (Page 196)

AP-51xx Access Point Product Reference Guide 5-48
6. Click the White List Entries button (within the WhiteList Configuration field) to create
a set of allowed destination IP addresses. These allowed destination IP addresses are called
a White List. Ten configurable IP addresses are allowed for each WLAN. For more
information, see
Defining the Hotspot White List on page 5-49 .
7. Refer to the Radius Accounting field to enable Radius accounting and specify the a
timeout and retry value for the Radius server.
NOTE The Enable Hotspot User Timeout option is only available if using the
access point’s internal Radius Server for user authentication.
NOTE If using an external Web Server over the WAN port, and the hotspot’s
HTTP pages (login or welcome) redirect to the access point’s WAN IP
address for CGI scripts, the IP address of the external Web server and the
access point’s WAN IP address should be entered in the White List.
Enable Accounting Select the Enable Accounting checkbox to enable a Radius
Accounting Server used for Radius authentication for a target
hotspot user.
Server Address Specify an IP address for the external Radius Accounting server
used to provide Radius accounting for the hotspot. If using this
option, an internal Radius server cannot be used. The IP address of
the internal Radius server is fixed at 127.0.0.1 and cannot be used
for the external Radius server.
Radius Port Specify the port on which the Radius accounting server is listening.
Shared Secret Specify a shared secret for accounting authentication for the
hotspot. The shared secret is required to match the shared secret
on the external Radius accounting server.
Timeout Set the timeout value in seconds (1-255) used to timeout users
accessing the Radius Accounting server if they have not
successfully accessed the Accounting Server.
Retries Define the number of retries (1-10) the user is allowed to access
the Radius Accounting Server if the first attempt fails. The default
is 1.