Motorola AP-51XX User Manual
Page 172
AP-51xx Access Point Product Reference Guide
5-24
To configure port forwarding for the access point:
1.
Select
Network Configuration
->
WAN
->
NAT
from the access point menu tree.
2.
Select
1 to 1
or
1 to Many
from the NAT Type drop-down menu.
3.
Click on the
Port Forwarding
button within the
Inbound Mappings
area.
4.
Configure the
Port Forwarding
screen to modify the following:
Add
Click
Add
to create a local map that includes the name, transport
protocol, start port, end port, IP address and Translation Port for
incoming packets.
Delete
Click
Delete
to remove a selected local map entry.
Name
Enter a name for the service being forwarded. The name can be any
alphanumeric string and is used for identification of the service.
Transport
Use the
Transport
pull-down menu to specify the transport
protocol used in this service. The choices are ALL, TCP, UDP, ICMP,
AH, ESP, and GRE.