Motorola AP-51XX User Manual
Page 255
Configuring Access Point Security
6-37
Use the
VPN
screen to add and remove VPN tunnels.
To configure an existing VPN tunnel, select it
from the list in the
VPN Tunnels
field. The selected tunnel’s configuration displays in a
VPN Tunnel
Config
field.
To configure a VPN tunnel on the access point:
1.
Select
Network Configuration
->
WAN
->
VPN
from the access point menu tree.
2.
Use the
VPN Tunnels
field to add or delete a tunnel to the list of available tunnels, list
tunnel network address information and display key exchange information for each tunnel.
Add
Click
Add
to add a VPN tunnel to the list. To configure a specific
tunnel, select it from the list and use the parameters within the
VPN Tunnel Config
field to set its properties.
Del
Click
Del
to delete a highlighted VPN tunnel. There is no
confirmation before deleting the tunnel.