Motorola AP-51XX User Manual
Page 170
AP-51xx Access Point Product Reference Guide
5-22
requests, and minimizes the number of WAN IP addresses needed when a range of local IP addresses
is mapped to each WAN IP address. NAT can be applied in one of two ways:
•
One-to-one mapping with a private side IP address
The private side IP address can belong to any of the private side subnets.
•
One-to-many mapping with a configurable range of private side IP addresses
Ranges can be specified from each of the private side subnets.
To configure IP address mappings for the access point:
1.
Select
Network Configuration
->
WAN
->
NAT
from the access point menu tree.
2.
Configure the
Address Mappings
field to generate a WAN IP address, define the NAT type
and set outbound/inbound NAT mappings.
WAN IP Address
The WAN IP addresses on the NAT screen are dynamically
generated from address settings applied on the
WAN
screen.