Motorola AP-51XX - Manual (Page 648)

AP-51xx Access Point Product Reference Guide 10-20
10.4.4 Sample Switch Configuration File for IPSec and Independent
WLAN
The following constitutes a sample RFS7000 switch configuration file supporting an AAP IPSec with
Independent WLAN configuration. Please note new AAP specific CLI commands in
red and relevant
comments in blue .
The sample output is as follows:
!
! configuration of RFS7000 RFS7000-1 version 1.1.0.0-016D
!
version 1.0
!
!
aaa authentication login default none
service prompt crash-info
!
hostname RFS7000-1
!
username admin password 1 8e67bb26b358e2ed20fe552ed6fb832f397a507d
username admin privilege superuser
username operator password 1 fe96dd39756ac41b74283a9292652d366d73931f
!
!
To configure the ACL to be used in the CRYPTO MAP
!
ip access-list extended AAP-ACL permit ip host 10.10.10.250 any rule-precedence 20
!
spanning-tree mst cisco-interoperability enable
spanning-tree mst config
name My Name
!
country-code us
logging buffered 4
logging console 7
logging host 157.235.92.97
logging syslog 7
snmp-server sysname RFS7000-1