Motorola AP-51XX User Manual

Page 327

Advertising
background image

Monitoring Statistics

7-29

6.

Refer to the

RF Status

field to view MU signal and signal disturbance information.

7.

Refer to the

Errors

field to view MU retry information and statistics on packets not

transmitted.

Throughput

The

Total

column displays the average total packets per second

crossing the selected MU. The

Rx

column displays the average

total packets per second received on the MU. The

Tx

column

displays the average total packets per second sent on the MU. The
number in black represents throughput for the last 30 seconds, the
number in blue represents throughput for the last hour.

Avg. Bit Speed

The

Total

column displays the average bit speed in Mbps for a

given time period on the MU. This includes all packets sent and
received. The number in black represents average bit speed for the
last 30 seconds and the number in blue represents average bit
speed for the last hour. Consider increasing the data rate of the AP
if the current bit speed does not meet network requirements. For
more information, see

Configuring the 802.11a or 802.11b/g Radio

on page 5-55

. The associated MU must also be set to the higher

rate to interoperate with the

access point

at that data rate.

% of Non-unicast pkts Displays the percentage of the total packets for the selected

mobile unit that are non-unicast. Non-unicast packets include
broadcast and multicast packets. The number in black represents
packets for the last 30 seconds and the number in blue represents
packets for the last hour.

Avg MU Signal

Displays RF signal strength in dBm for the target MU. The number
in black represents signal information for the last 30 seconds and
the number in blue represents signal information for the last hour.

Avg MU Noise

Displays RF noise for the target MU. The number in black
represents noise for the last 30 seconds, the number in blue
represents noise for the last hour.

Avg MU SNR

Displays the Signal to Noise Ratio (SNR) for the target MU. The
Signal to Noise Ratio is an indication of overall RF performance on
your wireless network.

Advertising