Motorola AP-51XX User Manual
Page 418
AP-51xx Access Point Product Reference Guide
8-84
mu-retry
<count>
Sets the EAP maximum number of MU retries to
<count> (
1
-
10
).
svr-timeout
<time>
Sets the server timeout <time> in seconds (
1
-
255
).
svr-retry
<count>
Sets the maximum number of server retries to
<count> (
1
-
255
).
Note: The WEP authentication mechanism saves
up to four different keys (one for each WLAN). It
is not requirement to set all keys, but you must
associate a WLAN with the same keys.
enc
<idx>
<type>
Sets the encryption type to <type> (one of
none
,
wep40
,
wep104
,
keyguard
,
tkip
, or
ccmp
) for
WLAN <idx>.
wep-
keyguard
passkey
<passkey>
The passkey used as a text abbreviation for the
entire key length (
4-32
).
index
<key index>
Selects the WEP/KeyGuard key (from one of the
four potential values of <key index> (
1
-
4
).
hex-key
<kidx>
<key string>
Sets the WEP/KeyGuard key for key index <kidx>
(
1
-
4
) for WLAN <kidx> to <key string>.
ascii-key
<kidx>
<key string>
Sets the WEP/KeyGuard key for key index <kidx>
(
1
-
4
) for WLAN <kidx> to <key string>.
mixed-mode
<mode>
Enables or disables interoperation with WEP128
clients.
Note: TKIP parameters are only affected if "tkip"
is selected as the encryption type.
tkip
rotate-mode
<mode>
Enables or disabled the broadcast key.
interval
<time>
Sets the broadcast key rotation interval to <time>
in seconds (
300
-
604800
).
allow-wpa2-
tkip
<mode>
Enables or disables the interoperation with
wpa2-tkip clients.
preauth
<mode>
Enables or disables preauthentication (fast
roaming).