Motorola AP-51XX - Manual (Page 469)

8-135
AP51xx>admin(network.firewall)> advanced
Description:
Displays whether an access point firewall rule is intended for inbound traffic to an interface or outbound traffic from that interface..
Syntax:
Example:
admin(network.firewall.adv-lan-access)> inbound
admin(network.firewall.adv-lan-access.inb)> list
-----------------------------------------------------------------------------
Idx SCR IP-Netmask Dst IP-Netmask TP SPorts DPorts Rev NAT Action
-----------------------------------------------------------------------------
1 1.2.3.4 2.2.2.2 all 1: 1: 0.0.0.0 deny
255.0.0.0 255.0.0.0 65535 65535 nat port 33
2 33.3.0.0 10.10.1.1 tcp 1: 1: 11.11.1.0 allow
255.255.255.0 255.255.255.0 65535 65535 nat port 0
For information on configuring the Firewall options available to the access point using the applet (GUI), see Configuring Firewall
Settings on page 6-27 .
show Shows advanced subnet access parameters.
set Sets advanced subnet access parameters.
import Imports rules from subnet access.
inbound Goes to the Inbound Firewall Rules submenu.
outbound Goes to the Outbound Firewall Rules submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to flash memory.
quit Quits and exits the CLI session.