Motorola AP-51XX User Manual
Page 200
AP-51xx Access Point Product Reference Guide
5-52
2.
Enable the radio(s) using the
Enable
checkbox(es).
Refer to
RF Band of Operation
parameter to ensure you are enabling the correct 802.11a
or 802.11b/g radio. After the settings are applied within this Radio Configuration screen, the
Radio Status
and
MUs connected
values update. If this is an existing radio within a mesh
network, these values update in real-time.
3.
Select the
Base Bridge
checkbox to allow the access point radio to accept client bridge
connections from other access points in client bridge mode. The base bridge is the acceptor
of mesh network data from those client bridges within the mesh network and never the
initiator.
CAUTION If a radio is disabled, be careful not to accidentally configure a new
WLAN, expecting the radio to be operating when you have forgotten it
was disabled.
!