Ap51xx>admin(system.ntp)> set – Motorola AP-51XX User Manual
Page 554
AP-51xx Access Point Product Reference Guide
8-220
AP51xx>admin(system.ntp)> set
Description:
Sets NTP parameters for access point clock synchronization.
Syntax:
Example:
admin(system.ntp)>
set mode enable
admin(system.ntp)>
set server 1 203.21.37.18
admin(system.ntp)>
set port 1 123
admin(system.ntp)>
set intrvl 15
admin(system.ntp)>
set zone 1
For information on configuring NTP using the applet (GUI), see
Configuring Network Time Protocol (NTP) on page 4-39
set mode
<ntp-mode>
Enables or disables NTP.
server
<idx> <ip>
Sets the NTP sever IP address.
port
<idx> <port>
Defines the port number.
intrvl
<period>
Defines the clock synchronization interval used between the access point and
the NTP server in minutes (15 - 65535).
time
<time>
Sets the current system time. [yyyy] - year, [mm] - month, [dd] - day of the
month, [hh] - hour of the day, [mm] - minute, [ss] second, [zone -idx] Index of the
zone.
zone
<zone>
Defines the time zone (by index) for the target country.