Motorola AP-51XX - Manual (Page 570)

AP-51xx Access Point Product Reference Guide 8-236
AP51xx>admin(system.fw-update)>set
Description:
Defines access point firmware update settings and user permissions.
Syntax:
admin(system.fw-update)> set fw-auto enable
admin(system.fw-update)> set cfg-auto enable
admin(system.fw-update)> set file 2.0.0.0-29D
admin(system.fw-update)> set path c:/fw
admin(system.fw-update)> set server 157.235.111.22
admin(system.fw-update)> set user mudskipper
admin(system.fw-update)> set passwd muddy
For information on updating access point device firmware using the applet (GUI), see Updating Device Firmware on page 4-49 .
set fw-auto <mode> When enabled, updates device firmware each time the firmware versions are found to be
different between the access point and the specified firmware on the remote system.
cfg-auto <mode> When enabled, updates device configuration file each time the confif file versions are
found to be different between the access point and the specified LAN or WAN interface.
file <name> Defines the firmware file name (1 to 39 characters).
path <path> Specifies a path for the file (1 to 39 characters)..
server <ip> The IP address for the FTP/TFTP server used for the firmware and/or config file update.
user <name> Specifies a username for FTP server login (1 to 39 characters)..
passwd <password> Specifies a password for FTP server login (1 to 39 characters).. Default is motorola.