Iomega DataSafe Network Device - Manual (Page 107)

DataSafe NAS User’s Manual 102
6. Click OK .
Related Topics
n
“Initial DataSafe NAS Configuration” on page 13
Removing a Group Account
You can remove any group account that you have
created. A group account that has been removed,
however, cannot be re-created.
To remove a user account
1. From the primary menu bar, select Users and
Groups.
2. Click Groups . (See Figure 40 on page 100.)
3. In the Object Selection table, select the group
account you wish to remove.
4. In the Tasks list, click Delete .
5. In the Delete Group dialog, verify that the group
identified is the group account you wish to delete,
then click
OK to delete the group account.
Related Topics
n
“Initial DataSafe NAS Configuration” on page 13
Modifying Group Properties
The Group Properties page displays the General tab
and the Members tab. Use the General tab to set or
modify the group name and description. Use the
Members tab to add or remove users and groups.
To set or modify a group name or description
1. On the primary menu bar, select Users and
Groups.
2. Select Groups. (See Figure 40 on page 100.)