Iomega DataSafe Network Device - Manual (Page 65)

DataSafe NAS User’s Manual 60
Enable Services
Microsoft recommends that you enable only the
necessary network components. Limiting the number
of enabled network components will enhance the
performance of other network services. Additionally, if
a problem is encountered with a network or dial-up
connection, the system will attempt to establish
connectivity by using every network protocol that is
installed and enabled. By only enabling the services
that your system can use, the DataSafe NAS can
conserve resources and perform better.
To enable a network service
1. On the primary menu bar, click Services .
The Manage Services page (Figure 19) displays.
Figure 19 Manage Services
2. On the Object Selection table, select the service
to enable.
3. On the Tasks list (adjacent to the Object
Selection table), click Enable .