Iomega DataSafe Network Device - Manual (Page 33)

DataSafe NAS User’s Manual 28
Figure 7 IP Address Configuration
5. Next to the Configuration option, select whether
to obtain the configuration automatically from the
DHCP server, or to manually configure the IP
address(es).
If you choose to obtain the configuration from the
DHCP server, click
OK to save your changes and
finish this task.
To manually set or change the IP settings
1. In the IP address text box, type the IP address,
then click Add .
The metric indicates the cost of using the routes
associated with this connection and becomes the
value in the Metric column for those routes in the
IP routing table. If there are multiple routes to a
destination in the IP routing table, the route with
the lowest metric is used. The default value is 1.