Iomega DataSafe Network Device - Manual (Page 51)

DataSafe NAS User’s Manual 46
Note: When you add a new team or if you delete a
team from the Network Control Panel, the
frame type for each adapter in the team
reverts to Auto. This is important only if you
need to manually set the frame type on your
adapters.
Breaking and Restoring Team
Configuration
CAUTION: To allow two different subnets to
access the DataSafe NAS, you must
break team configuration. In this case
the NIC failover feature will not be
provided.
To break team configuration
1. On the primary menu bar, click Network Setup .
2. On the Network Setup page, click NIC
Configuration .
3. Follow the prompts and re-enter your password.
The Adapters in a team window displays (see Fig-
ure 13 on page 45).
4. Select the Team adapter in the component tree.
5. From the
Action menu, select the Remove
command.
6. Click OK to commit the new configuration.
To restore team configuration
1. On the primary menu bar, click Network Setup .
2. On the Network Setup page, click NIC
Configuration .
3. Follow the prompts and reenter your password.