Iomega DataSafe Network Device - Manual (Page 29)

DataSafe NAS User’s Manual 24
To set or change the workgroup membership
of the DataSafe NAS
1. On the primary menu bar, click Network Setup .
2. On the Network Setup page, click Identification .
The Server Appliance Identity page (Figure 5) dis-
plays.
Figure 5 Server Appliance Identity
3. Select the Workgroup radio button and enter
the name of the workgroup to join.
4. If the DataSafe NAS belonged to a domain before
you joined the workgroup, the DataSafe NAS will
be disjoined from the domain and the computer
account will be disabled.
5. Click OK .
6. You will be asked to reboot the DataSafe NAS. You
may accept the reboot, or cancel it.
n
If you click OK , the DataSafe NAS will reboot and
a page will appear indicating that the unit is
restarting. After the DataSafe NAS is back online,
you must reinitiate your browser, then return to