Iomega DataSafe Network Device - Manual (Page 125)

DataSafe NAS User’s Manual 120
— OR —
n
Click the Allow ______ users radio button, then
specify the number of users to allow.
If you allow files to be cached in the shared folder, use
the
Setting drop-down list to specify the caching
option to use. The caching options are described in
“CIFS Overview” on page 163.
Permissions
You may also set permissions for users or groups who
are granted or denied access to the DataSafe NAS.
To set user permissions
1. In the
Add user or group entry box, type the
name of a user or group to add to the list of
permissions, or select a user from the list box
below it.
You can select local users or local groups from the
list. To add domain users or domain groups you
must type the account <domain name\user name>
or <domain name\group name>
2. To add the newly typed or selected user or group,
click Add .
3. Use the Allow drop-down list to set the degree of
control the users specified in the Permissions
list will have over files on the DataSafe NAS.
Users may have no control, read-only access,
change access, change and read access, or full
control.
4. Use the Deny drop-down list to deny a level of
control to the specified users and groups in the
Permissions list.
5. To remove a user or group from the Permissions
list, highlight the name of the user or group in the
list, then click
Remove .