Iomega DataSafe Network Device - Manual (Page 50)

DataSafe NAS User’s Manual 45
n
Adapter: Lists each adapter by name.
n
Priority: Lists the priority status for the adapters
in a team (if you have specified a priority). You can
specify that an adapter serve as the Primary or
Secondary adapter within the Adapter Fault
Tolerance function of a team.
The Status column lists the following states:
n
Active : The currently active adapter(s) in a team.
Adapters in FEC or GEC mode display this status to
show they are always active.
n
Standby : The current standby adapter In a team.
n
Disabled : The adapter has been removed or is
defective, or the driver has failed to load.
Figure 13 Adapters in a team
The Team Information section lists the following
details:
n
IP Address : Lists the IP Address for the adapter.
n
Team Type : Lists the team type for the adapter
highlighted in the Adapters in a Team status box.