Iomega DataSafe Network Device - Manual (Page 132)

DataSafe NAS User’s Manual 127
Adding a Macintosh or NetWare Share
To create a share, you must supply a share name that
is unique across all shares, the share path (that is, the
directory on the DataSafe NAS to be shared). Some
protocols also support the inclusion of a comment or
brief description of the share. Additionally, you must
enable at least one of the available protocols.
While a single user interface is provided to create a
share for all protocols, in actuality, a separate share is
created for each protocol. You can remove a share for
one protocol without removing the share for the
others, however, this is quite confusing and has to be
done carefully.
To add a Macintosh or NetWare share
1. On the primary menu bar, click Folders and
Shares.
2. Select the Macintosh and NetWare Shares
option.
3. Follow the prompts and re-enter your User name
and Password to open the Shared Folders
window (Figure 52 on page 125).
4. In the Action menu, select New File Share to
start the Create Shared Folder wizard (Figure
53).