Iomega DataSafe Network Device - Manual (Page 137)

DataSafe NAS User’s Manual 132
7 Maintenance
From the main Maintenance page, users can perform
the following general DataSafe NAS maintenance
tasks:
n
Set the date and time on the DataSafe NAS. (See
“Date and Time” on page 132.)
n
Shutdown or restart the DataSafe NAS. (See
“Shutdown Appliance” on page 133.)
n
Backup or restore the DataSafe NAS system
partition. (See “Back-up and Restore Tool” on
page 134.)
n
View and clear event logs. (See “Logs” on page
136.)
n
Manage all aspects of the DataSafe NAS by
connecting to the DataSafe NAS using the
Terminal Services Advanced Client. (See “Terminal
Services Client” on page 144.)
n
Set up and manage all aspects of email alert
notification. (See “E-mail Alerts” on page 148.)
This chapter also contains the section “Alerts” on
page 146, which covers DataSafe NAS Administration
UI alerts and LED alerts.
Date and Time
Using the Date and Time property page, you can set
the Date, Time, and Time Zone used by the DataSafe
NAS.
To set the date, time, and time zone of the
DataSafe NAS
1. On the primary menu bar, select Maintenance .
2. On the Maintenance page, click Date and Time .