Iomega DataSafe Network Device - Manual (Page 66)

DataSafe NAS User’s Manual 61
4. Click OK to confirm your choice.
Disable Services
To disable a network service
1. On the primary menu bar, click Services .
2. On the Object Selection table, select the service
to disable.
3. On the Tasks list (adjacent to the Object
Selection table), click Disable .
4. Click OK .
Configure Service Properties
Use the property page of the designated service to
configure the desired network services.
To configure network service properties
1. On the primary menu bar, click Services .
2. On the Object Selection table, select the service
to configure.
3. On the Tasks list (adjacent to the Object
Selection table), click Properties ….
The Service Properties page displays. (Figure
20 shows the HTTP Service Properties page.)