Iomega DataSafe Network Device - Manual (Page 87)

DataSafe NAS User’s Manual 82
2. On the secondary menu bar, select FTP .
—OR—
1. On the secondary menu bar, select the
FTP
Service option from the Object Selection table,
then click Properties .
2. The FTP Service Properties dialog box (Figure 29
on page 79) opens.
3. Select the Messages tab (Figure 31).
Figure 31 Messages tab of FTP Service Properties
4. In the Welcome message memo box, type the
message that will greet users when they connect
to the DataSafe NAS.
5. In the Exit message memo box, type the
message that will appear when users disconnect
from the DataSafe NAS.
6. Click OK .
Related Topics
n
“FTP Anonymous Access” on page 79
n
“FTP Logging” on page 79