Iomega DataSafe Network Device - Manual (Page 72)

DataSafe NAS User’s Manual 67
To remove members from an NFS client
group
1. On the primary menu bar, select Services .
2. On the secondary menu bar, select NFS .
3. On the NFS Service page, click Client Groups .
(See Figure 21 on page 65.)
4. On the Object Selection table, select the group
to edit.
5. From the Tasks list, click Edit . (See Figure 23 on
page 66.)
6. On the Edit NFS Client Group page, select the
IP address or computer name of the member to
remove from the group.
7. Click Remove .
8. Click OK .
Removing NFS Client Groups
To remove an NFS client group
1. On the primary menu bar, select Services .
2. On the secondary menu bar, select NFS .
3. On the NFS Service page, click Client Groups .
(See Figure 21 on page 65.)
4. On the Tasks list, click Delete .
5. On the Delete NFS Client Group page, click
OK to confirm the deletion.
NFS Locks
NFS locks allow a process to have exclusive access to
all or part of a file. File locking is implemented both on
the DataSafe NAS and the client. When a file is locked,
the buffer cache is not used for that file, and each
write request is immediately sent to the server.