Iomega DataSafe Network Device - Manual (Page 124)

DataSafe NAS User’s Manual 119
The General tab of the Share Properties dialog
(Figure 51) opens.
5. Change values as needed, including the name,
path, and description of the share, and the type(s)
of client from which the share is accessible.
6. Click the protocol tabs to open a page for
configuring the specific properties of each type of
share.
Before you can open any protocol tab, you must
check the box next to the corresponding option
under
Accessible from the following clients .
For more information see the following topics:
¨
“CIFS Share Properties” on page 119
¨
“NFS Share Properties” on page 121
¨
“FTP Share Properties” on page 122
¨
“HTTP Share Properties” on page 124
7. Click OK .
CIFS Share Properties
The Common Internet File System (CIFS) is the
protocol used by Windows clients. Use this page to
change the number of users who have access to a
share, change the caching options relative to the
share, and set or change user permissions.
Appliance settings
In the User Limit section, you may choose to allow
the maximum number of users, or you may specify the
number of connections which can be made at a given
time.
To set the user limit
n
Click the Maximum allowed radio button to
allow as many people to log on to the DataSafe
NAS as it can handle.