Iomega DataSafe Network Device - Manual (Page 48)

DataSafe NAS User’s Manual 43
Figure 11 Administration Site Properties
3. On the General tab of the Administration Site
Properties page:
a. Specify whether to use
All IP Addresses or
Just this IP Address .
b. If you choose to use Just this IP Address¸ use
the drop-down list to select the IP address to
use.
c. If changing the port, enter the new port num-
ber in the Port text box.
4. Click OK .
NIC Configuration
CAUTION: The DataSafe NAS comes with default
NIC Configuration settings, designed
for optimum use. Iomega Corporation
highly recommends that these setting
not be changed.