Iomega DataSafe Network Device - Manual (Page 47)

DataSafe NAS User’s Manual 42
Note: The new administrator password must
conform to any password complexity rules in
effect for the domain to which the DataSafe
NAS belongs.
5. Re-type the new administrator password in the
Confirm new password box.
6. Click OK .
Related Topics
n
“Initial DataSafe NAS Configuration” on page 13
Administration Web Server
This feature allows you to change the IP address(es)
and port that can be used to access the administration
site on the DataSafe NAS.
The default IP address to which the DataSafe NAS
responds or “listens” is typically changed in cases
where the DataSafe NAS is only managed on a certain
subnet or a separate management network.
The default listen port can be modified as needed to
work with existing network software and
configurations— for example, in the event that no
traffic above a given port number is allowed.
To change the Administration Web Site
properties
1. On the primary menu bar, click Network Setup.
2. On the Network Setup page, click Administration
Web Server.
The Administration Site Properties page (Figure 11)
displays.