Iomega DataSafe Network Device - Manual (Page 73)

DataSafe NAS User’s Manual 68
After a system failure, when the DataSafe NAS is
restarted the DataSafe NAS attempts to restore the file
lock status to the previous condition. If the client fails,
the DataSafe NAS releases the file lock. However,
after the client restarts it has a short period of time to
reclaim the file lock.
To manage NFS locks
1. On the primary menu bar, select Services .
2. In the Object Selection table of the Manage
Services screen, select NFS Service , then
select Properties in the Task column.
3. On the NFS Service page, click Locks .
The NFS Locks page (Figure 24) displays.
Figure 24 NFS Locks
4. On the NFS Locks page, from the Current
locks list box, select the client for which you want
to release the NFS locks.
5. In the Wait period text box, enter the number of
seconds after restarting that the DataSafe NAS
waits to re-establish a file lock with a client.
6. Click OK .