Sun Microsystems Sun Fire V20z - Manual (Page 102)

C-4 Sun Fire V20z Server User Guide • March 2004
C.2 diags get tests
C.2.1 Command
Access: Administrators
Description: Returns data describing the diagnostic tests that are available. This data
includes the specific test name and the module to which the test applies.
Command format: di ags get tests [{ -a | --all}] [{-H | --
noheader}]] [{-D | --delim delimiter}]
C.2.2 Return Codes
Following are the return values for this command:
Arguments Description
{-a | --all} Specifies to return information for all tests in the
system. Specifying no arguments also returns all
tests available for each device in the system.
{-H | --noheader} Suppresses header output.
{-D | --delim
delimiter} Delimits columns with the specified delimiter.
Headings are also delimited unless suppressed. The
delimiter can be any character or string.
Return Code ID Description
NWSE_Success 0 Command successfully completed.
NWSE_InvalidUsage 1 Invalid usage: bad parameter usage,
conflicting options specified.
NWSE_RPCTimeout 2 Request was issued, but was not serviced
by the server. RPC procedure timed out
and the request may or may not have
been serviced by the server.
NWSE_RPCNotConnected 3 Unable to connect to the RPC server.