Sun Microsystems Sun Fire V20z - Manual (Page 105)

Appendix C Diagnostics Commands C-7
C.4 diags start
C.4.1 Command
Access: Administrators
Description: Starts the service processor and platform diagnostics framework. You
must execute this command before running any tests.
The platform state must be either off or OS communicating. Refer to the platform
get os state
command in the Sun Fire V20z Server Management Guide for details
about these states.
Command format: diags start
C.4.2 Return Codes
Following are the return values for this command:
Return Code ID Description
NWSE_Success 0 Command successfully completed.
NWSE_InvalidUsage 1 Invalid usage: bad parameter usage,
conflicting options specified.
NWSE_RPCTimeout 2 Request was issued, but was not serviced
by the server. RPC procedure timed out
and the request may or may not have
been serviced by the server.
NWSE_RPCNotConnected 3 Unable to connect to the RPC server.
NWSE_InvalidArgument 4 One or more arguments were incorrect or
invalid.
NWSE_NoPermission 6 Not authorized to perform this
operation.
NWSE_InvalidOpForState 22 Invalid operation for current state.