Sun Microsystems Sun Fire V20z User Manual
Page 64
Advertising
4-12
Sun Fire V20z Server User Guide • March 2004
8. Disconnect the 5-pin power cable, the small flat cable, and the 68-pin ribbon
signal cable from the SCSI backplane.
Caution –
Use care with the small flat cables. They are extremely fragile.
FIGURE 4-14
Uncabling the SCSI Backplane
9. Unfasten the two screws securing the backplane to the chassis.
10. Lift the SCSI backplane up and out of the chassis.
FIGURE 4-15
Removing the SCSI Backplane
Advertising