Sun Microsystems Sun Fire V20z - Manual (Page 18)

1-8 Sun Fire V20z Server User Guide • March 2004
Dump SP Invokes the Troubleshooting Dump Utility (TDU) which
captures the following information and either sends it to
stdout or stores it in an output file:
• system state table (SST)
• hardware and software component versions
• machine check register values
• CPU trace buffers
• CPU configuration space registers (CSR)
• event log file
• the last good configuration (LGC)
By default, the TDU data is redirected to stdout. If you do
not provide a filename, the output is sent to stdout and the
log files are not created.
Otherwise, you can use this option to specify the name of
the output file to which the log files are copied. Storing to a
file is only available if you have configured an external file
system.
You can also invoke the TDU using the
sp get tdulog
command.
Use defaults Restores service processor settings to the default factory
configuration.
Note: All current data (network, users) is
lost and the service processor is rebooted.
Reboot SP Forces the service processor to shut down and reboot.
Note: The platform operating system is not affected.
TABLE 1-3 Operator Panel Menu Options (Continued)
Menu Menu Options Description