Sun Microsystems Sun Fire V20z - Manual (Page 50)

3-10 Sun Fire V20z Server User Guide • March 2004
3.4.4 Running Diagnostic Tests
When running tests, you can choose to execute all tests or specify a specific module
for which to run tests. The following options are available:
■ R un tests individually or collectively
■ C hoose the type (by module or name) of tests to run
■ D etermine the sequence in which the tests are run (using scripts)
■ V iew status messages about the success of the tests
You can run these tests on the machine on which you obtained them. You must have
the appropriate permissions to run these commands.
voltage limits.VDD_33_S3 VDD 33 S3
voltage limits.VDD_33_S5 VDD 33 S5
voltage limits.VDD_CPU0_25_S3 VDD CPU0 25 S3
voltage limits.VDD_CPU0_CORE_S0 VDD CPU0 CORE S0
voltage limits.VDD_CPU1_25_S3 VDD CPU1 25 S3
voltage limits.VDD_CPU1_CORE_S0 VDD CPU1 CORE S0
voltage limits.VLDT_CPU0_LDT1 VLDT CPU0 LDT1
voltage limits.VLDT_CPU0_LDT2 VLDT CPU0 LDT2
voltage limits.VLDT_G_LDT1 VLDT G LDT1
voltage limits.VTT_CPU0_DDR_S3 VTT CPU0 DDR S3
voltage limits.VTT_CPU1_DDR_S3 VTT CPU1 DDR S3
TABLE 3-1 Diagnostics Modules and Tests (Continued)
Module Test Devices