Sun Microsystems Sun Fire V20z - Manual (Page 27)

Chapter 2 Powering On and Configuring the Server 2-3
2.3 Escape Sequences for Remote Console
Terminal
If you are accessing your Sun Fire V20z server using a remote console terminal, you
may need to use the escape sequences shown in
TABLE 2-1 . If a regular function key
is not working properly, use the escape sequence listed next to it in the table.
You will most likely need to use the escape sequences if you are using a Linux or
Solaris operating system.
TABLE 2-1 Special Keys for Remote Console Terminal
Function Key Escape Sequence
HOME <ESC> h
END <ESC> k
INSERT <ESC> +
DELETE <ESC> -
PAGE UP <ESC> ?
PAGE DOWN <ESC> /
ALT <ESC>^A
CTRL <ESC>^C
F1 <ESC> 1
F2 <ESC> 2
F3 <ESC> 3
F4 <ESC> 4
F5 <ESC> 5
F6 <ESC> 6
F7 <ESC> 7
F8 <ESC> 8
F9 <ESC> 9
F10 <ESC> 0
F11 <ESC> !
F12 <ESC> @