Sun Microsystems Sun Fire V20z - Manual (Page 67)

Chapter 4 Maintaining the Server 4-15
5. Unfasten the single screw securing the CD-ROM/DVD/Floppy Disk Drive
assembly to the chassis (see Figure 4-19).
6. Slide the assembly towards the rear of the chassis approximately 0.5” (12mm).
FIGURE 4-19 Removing the CD-ROM/DVD/Floppy Disk Drive Assembly
Caution – Move the assembly by grasping it by its sides. Do not to push on the
CD-ROM tray.
7. Lift the rear of the assembly slightly, and withdraw it from the chassis.
Installation is the reverse of this procedure.
Note – Check the routing of all cables for obstructions before reinstalling the cover.